Mega Miata

My Megasquirt DIYPNP adventure with my 1997 NA MX5 Mazda Miata. *******Remote tuning available, elior77@gmail.com********

Monday, December 17, 2018

Idle Advanced Settings

›
Hey, long time no post :| I'm starting my second year studying Electronics Engineering  - no time for nothing... The last piece in t...
4 comments:
Sunday, October 22, 2017

How to control VCT (VVT) using DIYPNP

›
VVT (VCT) Control using DIYPNP ?? No way ! well yes :) Just keep reading Any one who considered a VVT (BP6D) engine swap had to answer the...
1 comment:
Sunday, September 24, 2017

Flatshift and Launch control - 2 step

›
Always wanted to shoot flames and make gun shots sounds from your tail pipe ? GOOD ! Let me show you how. I will guide through how to se...
3 comments:
Monday, December 26, 2016

Barometric correction for 12$

›
Hey, Barometric correction will help your fueling when going dramatically below/above sea level. Hardware needed: Hope it is still on....
Sunday, July 31, 2016

Closed Loop Idle REV 2.2

›
Closed Loop Idle REV 2.2 Overview CLI is intended to help keep steady idle when the load on the engine change, load change can come from:...
2 comments:
Monday, July 4, 2016

Closed Loop Idle REV 2.1

›
Closed Loop Idle REV 2.1 Overview CLI is intended to help keep steady idle when the load on the engine change, load change can come from:...
1 comment:
Monday, June 13, 2016

Electronic boost controller - How to.

›
Hey ! ***Firmware 3.4.3 Beta2 and above is required !*** Quick workaround was switching between PA0 and ALED outputs, using PA0 for EBC ...
›
Home
View web version
Powered by Blogger.